Mechanical Supervisor - B58 - China

Our Vision.

SBM Offshore believes the oceans will provide the world with safe, sustainable and affordable energy for generations to come. We share our experience to make it happen.

Our Profile.

We design, build, install and operate offshore floating facilities for the offshore energy industry. As a leading technology provider, we put our marine expertise at the service of a responsible energy transition by reducing emissions from fossil fuel production, while developing cleaner solutions for renewable energy sources. More than 7,000 SBMers worldwide are committed to sharing their experience to deliver safe, sustainable and affordable energy from the oceans for generations to come. Together, we are driving progress forward in a TRUE. BLUE. TRANSITION. 

#OGJS

Location: Nantong

Employment: Contractor

Duration:18 months

JOIN US!
This posting has for objective to give ourselves the chance to work together, in the short, medium, or long term. SBM Offshore's active leadership position on the market, combined with our People Development and Succession Planning activities, requires us to be ready to onboard and mobilize our future Mechanical Supervisor as soon as a new vacancy opens!

You are considering a new challenge in a few weeks, months, or even years? If you match the requirements below, APPLY NOW!

Job Description:

1) Manage And Supervise Effectively

1 Establish effective relationships with colleagues and subordinates.

2 Establish scope of work clearly (briefings, toolbox talks, presentations).

3 Plan and control use of resources effectively. (Personnel, time, materials, transport, IT).

4 Use of communication skills shows leadership (oral, teambuilding, recording, noting, handover, analysing.

5 Objective and consistent in assessment of subordinates using competence assessment system.

6 Ensure all Maintenance (Routine and breakdown) is completed and recorded accurately and clearly

7 Ensure all plant and machinery complies with Class and Inspections

2) Dismantle, Repair and Reassemble Mechanical Equipment.

1 Identify potential sources of hazard prior to dismantling.

2 Use correct procedures and correct method of dismantling.

3 Carry out the correct isolation and disconnection procedure.

4 Identify, check and prepare components.

5 Make effective repairs without wasting resources.

6 Apply appropriate tests and test equipment to ensure reassembly is correct and effective prior to reinstatement.

7 Carry out test runs on equipment by agreement with Operations.

8 Clearly record any checks and actions taken in work history/log.

3) Condition Monitor Mechanical Equipment.

1 Obtain and check equipment datum point for condition monitoring purposes.

2 Set up and use condition monitoring equipment correctly.

3 Obtain accurate readings and record in database.

4) Diagnose faults in Mechanical Equipment.

1 Respond promptly to problems in line with approved procedures.

2 Select appropriate tests and diagnostic procedures and apply them methodically.

3 Use the results of inspections to determine the appropriate actions to take.

4 Record an accurate and full description in the appropriate document history.

5) Monitor and Maintain Pollution Control Measures

1 Ensure that controlled discharges from area of responsibility to the environment are within prescribed limits.

2 Identify and halt unplanned discharges where possible, and reported immediately according to Management System Procedures

3 Equipment, waste or other materials for disposal are dealt with according to the correct procedure.

4 Resources such as PPE materials tools and spares are not wasted or used inefficiently.

6) Contribute to The Health and Safety of the Working Environment

1 Work area within your own responsibility is kept clean and free of hazards.

2 Positive action is taken to stop hazards and unsafe behaviours.

3 All potential and actual incidents are reported to the relevant supervisor.

7) Emergency Response

1 Show competence during drills and exercises.

2 Perform Emergency Response Role Competently

Requirements:

1. HNC/HND or equivalent in mechanical Engineering preferred. OR Chief Engineer Certificate as per STCW Reg AIII/2 .

2. Minimum 5 years offshore experience of which 3 must be at supervisor level.

3. Extensive experience in maintenance of oil pumps, gas compressors (reciprocating and centrifugal), water injection pumps, and power generation equipment.

4. FPSO experience desirable.

5. Fully experienced with PTW and Risk Assessment Techniques.

6. Medically fit to offshore International standards such as ENG1 or equivalent.

GENERAL INFORMATION

SBM Offshore N.V. is a listed holding company that is headquartered in Amsterdam. It holds direct and indirect interests in other companies that collectively with SBM Offshore N.V. form the SBM Offshore Group (“the Company”). For further information, please visit our website at www.sbmoffshore.com. The companies in which SBM Offshore N.V., directly and indirectly, owns investments are separate entities.

SBM Offshore is proud to be an Equal Employment Opportunity and Affirmative Action employer. SBM Offshore does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status, or any other basis covered by appropriate law.  All employment is decided on the basis of qualifications, merit, and business need.